Meltric Corporation

View Application Examples  View Features  View Benefits  View Meltric Warranty

Meltric Industrial Plugs and Receptacles - Update your Plugs & Receptacles to Ensure Arc Flash Protection & NFPA 70E Compliance! Meltric makes it easy. Replace existing plugs & receptacles with Meltric's Decontactor Series switch rated plugs & receptacles to simplify NFPA 70E compliance. Meltric manufactures a complete, high-tech line of power plugs, receptacles, connectors, including multipins that are U.L. approved, and horsepower rated to connect and disconnect under load from 20 amps to 600 amps up to 600 volts without a mechanical interlock required. The non-fused disconnect switch, using a pressure contact technology with a proven track record for safety and reliability--similar to that of heavy duty switchgear, has a world wide patent. They are offered in watertight configurations, with all units meeting NEC requirements for lockout/tagout. This design takes safety to a new and higher level versus the soon-to-be outdated pin / sleeve and twist-lock technology. Meltric products are safe, simple, switch rated & cost effective too!

Request A Free Meltric Catalog available on CD

Switch ratings ensure safe load breaking/making - even in overload situations.

Dead front construction prevents exposure to live parts and arc flash hazards.

Separation of the plug & receptacle provides verification of de-energization.

Plug & play simplicity allows any qualified employee to quickly connect and disconnect electrical equipment.

Lockout provisions facilitate easy compliance with lockout/tagout requirements

Meltric's Products

Plugs, Receptacles, Inlets, and Connectors DSN Decontactor Series 20 - 150 AMPS Heavy duty, watertight (NEMA 4X, IP67), and non-metallic range of plugs, receptacles, inlets, and connectors - switch and horsepower rated for resistive and inductive loads DS Decontactor Series 20 - 200 AMPS Heavy duty, watertight (NEMA 3R to 4X, IP44, IP67), metallic and non-metallic range of plugs, receptacles, inlets, and connectors - switch and/or horsepower rated for resistive and inductive loads Ship to Shore Power Solution Safety Switch/Receptacle Combinations Series Meltric Safety Switch Disconnect Consists of a DS Series receptacle and angle mounted and wired to a heavy duty, single throw, fusible safety switch. They can optionally be provided with DSN or DB series Decontactors, straight mounting adapters, non-fused switches, or with circuit breaker protection. PN Series 15 - 30 AMPS Small, compact, metallic and non-metallic industrial and commercial use plugs, receptacles, inlets, and connectors - circuit breaking type for load making and breaking DR Series 30 - 400 AMPS Heavy duty, metallic and non-metallic plugs, receptacles, inlets, and connectors - disconnect service only - not for current interrupting, but has all the other safety features of the DS & DSR ranges DSDC Series DC rated plugs and receptacles Provide safe and robust connections for direct current applications up to 750VDC. The DSDC’s spring-loaded, silver-nickel butt contacts and dead front construction provide more consistent and reliable connections and significant improvements in operator safety. - not for current interrupting Multipin Series Multipin Series includes the following series, DN, DR, DS, DSN, and PN series 5 - 150 AMPS 6 - 37 pins, metallic and non-metallic, heavy duty, circuit making and breaking, plugs, receptacles, inlets, and connectors - designed for 10,000 minimum plug and unplug cycles either on or off load PFQ / PF Series 300 - 600 AMPS Very heavy duty, watertight (IP67), metallic plugs, receptacles, inlets, and connectors - mechanically interlocked pilot pins and safety shutters for safe and easy operations Ship to Shore Power Solution DX Hazardous Duty Series 20 - 100 AMPS Class I Div 1 & Div 2, Class II Div 1 & Div 2, hazardous location, plugs, receptacles, inlets, and connectors - IEC rated for Zone 1 DXN Hazardous Duty Series 20, 30,& 60 AMPS NEMA 4X and IP67 watertight seal Class I Div 1 & Div 2, Class II Div 1 & Div 2, hazardous location, plugs, receptacles, inlets, and connectors - IEC rated for Zone 1 DXN37c Hazardous Duty Multipin Series 5 Non-Current Interrupting AMPS DXN37C multipin plugs and receptacles are excellent for low amperage control applications. Thirty-seven contacts are available on the device which is ATEX rated up to 5A and 220V. PXN12C Hazardous Duty Multipin Series 10 Non-Current Interrupting AMPS PXN12C multipin plugs and receptacles are ideal for applications requiring compact size. Twelve contacts are available with ATEX ratings up to 10A and 220V. SPeX Hazardous Duty Single Pole Series 680 Non-Current Interrupting AMPS SPeX single pole plugs and connectors are suitable for high amperage applications up to 680A and 1000V where safety and ease of operation are preferred. SPeX's are ATEX rated. SP: Single Pole, High Amperage 600Amp, 600 VAC SP devices are designed for safety, durability and ease of operation. SP receptacles are IP 2X rated to prevent accidental finger contact with live parts and are also equipped with pilot contacts for controlling the power circuit. The pilot contacts are interlocked with the latching mechanism to prevent connection or disconnection under load CS1000: Single Pole, High Amperage High Amperage Capacity up to 400A at 600VAC, 600VDC (in North America) or 1000VAC, 1500VDC (in Europe - CE rated) The CS1000 devices are designed to be a new industry standard for safety, usability, reliability, performance and durability. The CS1000 Series provides safety features that are not currently offered by other single pole devices. These safety features include: IP2X finger protection that protects users from live parts, mechanical keying system prevents insertion of the wrong phases, a locking pin that prevents accidental disconnection, and a plug/receptacle that accepts different cable sizes. The standard features of CS1000 Series include solid silver-nickel contacts, spring-loaded, butt-style contact technology and IP66/IP67 environmental protection WS: Single Pole 200 - 1000 AMPS Single pole connectors and plugs for welding and other applications requiring single line feeds  Meltric Catalog Request Request A Free Meltric Catalog available on CD Or Download the whole Meltric catalog here **Specifications subject to changes**